FN7-12D 12KV LBS indoor Medium voltage load break switch with earthing switch
ABB NAL series 12KV LBS medium voltage load break switch for RMU similar as
12KV MV Outdoor Off-Load overhead line isolator disconnector LBS load break switch
As a protection and control unit for power grid equipment and industrial and mining enterprise power design
Mainly used for opening closing the power system load current, overload current and short - circuit current
12KV MV VCB outdoor high voltage vacuum circuit breaker with controller
Transformer is one of the important electrical equipment in power system, it is similar to power transformer, is used to convert circuit voltage or current. However, the purpose of the power transformer switching voltage and current, is to transfer the power, voltage or current transformer transformation, the purpose of measuring and monitoring circuit voltage or current. In general, power transformer capacity is big, the change of the voltage or current error, transformer capacity is small, the change of the voltage or current error is small. In the measuring circuit, which is used to convert current, the current meter and relay is called a current transformer, power transformer is used to convert voltage, the voltage meter and relay of power transformer is called voltage transformer.
This type of transformer is suitable for current and energy measurement and relay protection in 50Hz and 66kV power systems.
This type of transformer is suitable for current and energy measurement and relay protection in 50Hz and 66kV power systems.
This series of current inductors includes LB-60W2 LB-66W2 (LB-72.5W2) LB6-110W2 (LB9-126W2) LB6-120W2 (LB9-123W2), LB-132W2 LB138W2 (LB-145W2) and other models, available for 60 ~145KV, 5060H power system is used for current, energy measurement and relay protection.
This series of products is divided into: ordinary type and cast aluminum type according to the fuel tank material.
This series of voltage transformers can provide five-coil products according to customer requirements.
This type of transformer is a single-phase three-winding series insulation, outdoor installation, suitable for voltage supply, electric energy measurement and relay protection in 50Hz, 66kV neutral point non-effectively grounded systems.
This series of voltage transformers can provide five-coil products according to customer requirements.
Capacitive voltage transformers are widely used in AC power systems for measurement, control, protection and high-frequency carrier communication.
This series of voltage transformers can provide five-coil products according to customer requirements.
The classification of the transformer:
According to the principle of classification: can be divided into capacitive voltage transformer and voltage transformer electromagnetic voltage transformer, current transformer are electromagnetic current transformer.
According to the winding insulation medium classification, there are dry, pouring, oil-immersed and inflatable (SF6).
According to use classification: can be divided into two broad categories, voltage transformer, current transformer, can divide again for measuring, protection, special purpose and precise four classes.
According to the installation site classification: can be divided into indoor type and outdoor type two kinds.
According to the number of phase voltage transformer classification: can be divided into two kinds of single-phase, three-phase.
Voltage transformer windings by several categories: duplex winding, three-winding two kinds.
The classification of the current transformer according to the installation method: wear a wall type, support type and loading type 3 kinds.
The classification of the current transformer according to the current ratio: a single variable ratio and changeable than two.
Copyright © 2021 By JGGY Electrical.com